Imprint

Privacy Policy

Shipping

Faqs

Product Catalogue

Data Sheets

Material Profiles

Contact

Story

Career At Extrudr

Our modern Bird Feeder is a sleek addition to any garden and offers small birds a safe, cozy feeding space. It’s easily hung up with a simple cord, so you can place it wherever you like.

Designed with care, the entrance allows only small birds to access the food – protecting them from larger species like crows and letting them eat in peace. Just fill the sphere with birdseed, and the attached perch bar gives them a place to land and rest.

The print takes about 12 hours. We use our bio-based GreenTec Pro in natural color, which is understated and elegant, much more harmonious than bright hues. While not a typical outdoor filament, GreenTec Pro performs surprisingly well and blends beautifully with natural surroundings.

Extrudr_BirdFeeder_GreenTEC Pro.3mf

_MG_7243.jpg

_MG_7301.jpg

summer-sale_web-banner-bird-feeder-03.jpg

Vogelhaus

GreenTEC Pro nature 1,75 mm 0,8 kg

Bird Feeder

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Have fun with printing and playing in the pool!&nbsp;

Watergun_Extrudr.zip

gewinnspiel-sommer-2023-1x1.jpg

gewinnspiel-sommer-2023-1x1-02.jpg

Wasserpistole

PETG red 1,75 mm 1,1 kg

FLEX Semisoft black 1,75 mm 0,75 kg

FLEX Medium hellfire red 1,75 mm 0,75 kg

PCTG anthracite 1,75 mm 0,8 kg

Water gun

This compact and futuristic bedside table is 3D printed using 850 g of high-quality PLA NX2 filament from Extrudr. Designed with clean lines and a modern aesthetic, the table also works perfectly as a<b> plant stand</b> or minimalist <b>coffee table</b>. Its sleek matte finish and unique geometry make it a standout piece in any interior space.

The design requires some support structures during printing – tree supports were used to ensure optimal surface quality and dimensional accuracy.

For outdoor use, we recommend DuraPro ASA – it offers reliable UV resistance and excellent weather durability.

Special thanks to SMACKMAX for providing us with this design. Check out his <a href="https://makerworld.com/de/@SMACKMAX">makerworld </a>here.&nbsp;

Vogelhaus

Material

GreenTEC Pro

Filamentfarbe

natur

Unterstützung

nein

Lizenz

Weitere inspirationen

Wasserpistole

Futuristischer Beistelltisch

Suche

Vogelhaus

Material

GreenTEC Pro

Filamentfarbe

natur

Unterstützung

nein

Lizenz

Weitere inspirationen

Wasserpistole

Futuristischer Beistelltisch