3D Printed Beer Cooler:&nbsp;The Ultimate Chiller

What could be better than a cool beer on a hot summer day. We have something for you. The mould for the beer cooler was printed with FLEX medium hellfire red. Due to the stretchability of the material, the ice can be easily removed from the mould.

bierkuehler-02-1x1.jpg

bierkuehler-03-1x1.jpg

bierkuehler-01.jpg

Beercooler.zip

bierkuehler-04-1x1.jpg

Bierkühlung 

FLEX Medium hellfire red 1,75 mm 0,75 kg

Beer Cooler 

3D printed snowflakes: Elevate your winter decor

Create your own winter wonderland with 3D printed snowflakes made from our PCTG filament. Each snowflake is a masterpiece of design and innovation and brings a touch of magic to your home. Be creative and try out different colours!

Snowflake.zip

1x1_foto-02.jpg

Schneeflocken

PCTG transparent 1,75 mm 0,8 kg

PCTG white 1,75 mm 0,8 kg

Snowflakes  

Fruit bowl with a modern design twist

There are a few things to consider: Many Extrudr materials are food safe on their own (see data sheets). However, not every color is food safe (info in additional information sheet). Bacteria can easily settle in the spaces between the individual layers. It is therefore advisable to close these gaps with a food-safe coating.&nbsp;FDA approval is always necessary for the end product, because the end product has to meet the criteria.

Fruitbowl.zip

625A1909.jpg

Obstschale

GreenTEC Pro black 1,75 mm 0,8 kg

Fruit bowl  

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Bierkühlung

Material

FLEX Medium

Filamentfarbe

hellfire rot

Unterstützung

nein

Lizenz

Weitere inspirationen

Schneeflocken

Obstschale

Wasserpistole

Suche

Bierkühlung

Material

FLEX Medium

Filamentfarbe

hellfire rot

Unterstützung

nein

Lizenz

Weitere inspirationen

Schneeflocken

Obstschale

Wasserpistole