XPETG CF combines the reliability of standard PETG with the added stiffness of carbon fiber reinforcement. Built for rigid, load-bearing parts, it delivers greater tensile strength and heat resistance, holding its shape under stress where standard PETG would flex. Ideal for functional components, jigs, and technical parts that need to perform under real mechanical demands.
XPETG CF
SKU: 9010241026975
Material
XPETG CFcolor
black | RAL 9017Filament diameter
1.75 mmCoil
0.8 kgincl. VAT
50,41 €
35,28 €
incl. VAT
50,41 €
35,28 €
Currently out of stock
Made in Austria
Secure Checkout With
INCREASED DURABILITY
IDEAL FOR
- Rigid, Load-Bearing Parts
- Functional Components Under Stress
- Heat-Exposed Technical Parts
Fixtures & Tooling
XPETG CF Highlights
STIFFER THAN STANDARD PETG
Carbon fiber reinforcement increases tensile strength and rigidity, so parts resist flexing and hold their shape under load.
HEAT RESISTANT UP TO 85°C
Improved heat distortion resistance compared to standard PETG, holds its shape at higher temperatures.
VERY GOOD CHEMICAL RESISTANCE
Holds up against a broad range of chemicals and solvents, suited to parts that need to withstand real-world exposure.
FLAME RETARDANT (UL 94)
Rated flame retardant according to UL 94 at a 3.2mm wall thickness, an added safety margin for technical applications.
FITS ANY PRINTER, ANY SYSTEM
From standard FDM printers to AMS and multi-material setups, Extrudr filament is built to work reliably with the printer you already own.
MADE IN AUSTRIA
From the Austrian Alps, every Extrudr spool is manufactured with care, precision and strict EU standards.
Nozzle temperature 220–250 °C
Build plate temperature 60–90 °C
Surface preparation Not required
Speed 20–200 mm/s
Cooling fan 20–50 %
Enclosed chamber required For larger components
Hardened nozzle required Yes
Max. volumetric flow rate 10 mm³/s
Recommended settings for printers with a 0.4 mm nozzle. Max. 50% layer height. Optimal settings may vary between printers and are also dependent on environmental factors.
Drying temperature 60 °C
Drying time 4–6 h
Our material profiles make printing easier and more reliable. The profiles are perfectly optimised for Extrudr filaments and deliver perfect results straight away. Simply select your printer and material, import the profile into your slicer, and you’re ready to go.
| Mechanical Properties | Method | Value | Rating |
|---|---|---|---|
| Tensile modulus (Young's modulus) | ISO 527-1 | 5000 MPa | Outstanding |
| Tensile strength at yield | ISO 527–1/-2 | 59 MPa ±0.4 | Very Good |
| Tensile stress at break | ISO 527-1 | 62 MPa | Excellent |
| Elongation at break | ISO 527-1 | 3 % | Typical |
| Flexural modulus | ISO 178 | 3800 MPa | Excellent |
| Flexural strength | ISO 178 | 88 MPa | Very Good |
| Charpy notched impact strength (+23°C) | ISO 179-1eA | 5 kJ/m² | Typical |
| Charpy notched impact strength (-30°C) | ISO 179-1eA | 3.5 kJ/m² | Typical |
| Charpy unnotched impact strength (+23°C) | ISO 179-1eU | 22 kJ/m² | Typical |
| Charpy unnotched impact strength (-30°C) | ISO 179-1eU | 16 kJ/m² | Typical |
| Puncture maximum energy (-30°C) | ISO 6603-2 | 5 J | - |
| Multiaxial instrumented impact, peak force (-30°C) | ISO 6603-2 | 1700 N | Typical |
| Thermal Properties | Method | Value | Rating |
|---|---|---|---|
| Heat deflection temp. (HDT/B) — 0.45 MPa | ISO 75-1 | 73 °C | Typical |
| Heat deflection temp. (HDT/A) — 1.8 MPa | ISO 75-1 | 68 °C | Typical |
| Vicat softening temp. (VST/B50) | ISO 306 | 76 °C | Typical |
| Melting point (Tm) | ISO 3146-C | Amorphous (no Tm) | - |
| Glass transition temp. (Tg) | ISO 11357-1 (DSC) | 80 °C | Good |
| Melt flow rate (MFR) — 210°C/2.16 kg | ISO 1133-1 (210°C/2.16 kg) | 5 g/10 min | Typical |
| Melt volume rate (MVR) — 235°C/5.0 kg | - | 35 cm³/10 min | Outstanding |
| Thermal decomposition temp. | - | 370 °C | Outstanding |
| CLTE — flow direction | - | 0.4 cm/cm/°C | Excellent |
| Physical Properties | Method | Value | Rating |
|---|---|---|---|
| Density | ISO 1183-1 | 1.31 g/cm³ | - |
| Water absorption (saturation, 23°C) | - | < 0.1 % | - |
| Mould shrinkage | ISO 294-4 | 0.2–0.3 % | - |
| Special Properties | Method | Value | Rating |
|---|---|---|---|
| UV resistance | - | Good | - |
| Chemical resistance | - | Good | - |
| Fire & Compliance | Method | Value | Rating |
|---|---|---|---|
| Flammability rating (UL 94) | - | (not tested) | - |
PRINTING & COMPATIBILITY
XPETG CF is compatible with all standard FDM printers on the market.
Yes. As with all carbon-fiber-reinforced materials, the abrasive content will gradually wear down a standard brass nozzle. We recommend a hardened nozzle (e.g., hardened steel or ruby) for smooth, reliable extrusion and consistent nozzle lifespan.
Yes. XPETG CF is fully compatible with AMS (Automatic Material System) solutions, including the Bambu Lab AMS.
Yes. XPETG CF is a hygroscopic material and should be dried before printing to achieve optimal print quality. We recommend drying for 4–6 hours at 60°C.
MATERIAL PROPERTIES
XPETG CF offers greater tensile strength and heat resistance than standard PETG, thanks to carbon fiber reinforcement, making it well-suited to rigid, load-bearing parts. This added stiffness comes with a trade-off in impact resistance compared to standard PETG, so XPETG CF is best suited to applications where rigidity matters more than shock resistance.
XPETG CF offers good resistance to UV, moisture, and heat, making it generally suitable for outdoor use. However, prolonged, permanent outdoor exposure can still cause gradual fading or embrittlement over time.
CERTIFICATION & COMPLIANCE
No. Carbon fiber reinforced filaments, including XPETG CF, are not certified for food contact. Any application requiring food safety should use a non-reinforced filament with confirmed food-contact compliance, such as PETG.
CARE & STORAGE
Store XPETG CF in a dry room at room temperature (18–27°C / 65–80°F). Stored neatly, it is protected from dust and sunlight.
When stored correctly, XPETG CF has a shelf life of 2 years.
5
5
1
4
0
3
0
2
0
1
0
Latest reviews
BR
B3D-Druck - Robin
Oct 30, 2026
Sehr gutes PETG-CF
Super mit den herunterladbaren einstellungen zu Drucken. Super schöne Oberfläche. Werde ich wieder bestellen.
Super mit den herunterladbaren einstellungen zu Drucken. Super schöne Oberfläche. Werde ich wieder bestellen.
Other customers also bought
-40%
UP TO 1000 MM/S
UP TO 1000 MM/S