DuraPro PC FR V0

DuraPro PC FR V0 is compatible with all standard FDM printers on the market. Note: an enclosed print chamber is required, and a heated bed capable of reaching 110°C is recommended.

No. DuraPro PC FR V0 prints reliably with a standard nozzle.

Yes. DuraPro PC FR V0 is fully compatible with AMS (Automatic Material System) solutions, including the Bambu Lab AMS.

Yes. DuraPro PC FR V0 is a hygroscopic material and should be dried before printing to achieve optimal print quality. We recommend drying for 8–12 hours at a maximum of 65°C.

The raw material is pre-tested to UL 94 V-0 (at 1.5mm) and UL 94 5VA (at 3.0mm), among the highest flame-retardancy classifications for plastics. Final certification of a printed part is the customer's responsibility and depends on the specific application, geometry, and part design.

The material has been used by customers in railway industry applications requiring stringent fire-safety standards. As with all compliance and certification claims, Extrudr provides pre-tested raw material data; certification of a finished part for a specific application, including railway use, remains the customer's responsibility.

Yes. With a volume resistivity of 1E15 Ohm·m and a dielectric strength of 35 kV/mm, it offers strong electrical insulation, suited to electrical and electronic applications.

Yes. DuraPro PC FR V0 is suitable for outdoor use.

No. DuraPro PC FR V0 is not suitable for food contact.

Compliance and pre-testing apply to the raw material, not the finished printed part. Any part intended for a regulated or safety-critical application must undergo its own certification process by an accredited third-party laboratory. Requirements vary depending on intended use and applicable standards.

Store DuraPro PC FR V0 in a dry room at room temperature (18–27°C / 65–80°F). Stored neatly, it is protected from dust and sunlight.

When stored correctly, DuraPro PC FR V0 has a shelf life of 2 years.