Only 18 left in stock
GreenTEC is a sustainable, high-performance filament made from 100% renewable raw materials, CO2 neutral, oil-free, and food-safe compliant. It offers a heat distortion resistance of 115°C, comparable to ABS, along with high impact strength, all finished with a premium matte surface. Whether you need heat resistance for functional parts or a genuinely sustainable alternative to petroleum-based materials, GreenTEC delivers real industrial performance without the trade-offs.
A heat distortion resistance of 115°C, performance comparable to ABS, from a renewable material.
Made from 100% renewable raw material, with CO2-neutral, oil-free production - genuine sustainability.
When you're looking for that perfect finish, matte wins. A smooth, non-glossy surface for makers and designers who care as much about look as function.
Genuine toughness for parts that need to withstand real mechanical stress, without sacrificing reliability.
From standard FDM printers to AMS and multi-material setups, Extrudr filament is built to work reliably with the printer you already own.
From the Austrian Alps, every Extrudr spool is manufactured with care, precision and strict EU standards.
GreenTEC is compatible with all standard FDM printers on the market.
Yes. GreenTEC is fully compatible with AMS (Automatic Material System) solutions, including the Bambu Lab AMS.
No. GreenTEC does not require drying before use to achieve optimal print quality.
GreenTEC offers heat distortion resistance comparable to ABS (115°C), along with high impact strength, while being made from 100% renewable raw materials rather than petroleum-based sources. It also produces significantly less odor during printing than ABS, and doesn't require an enclosed print space.
Yes, GreenTEC is generally suitable for outdoor use, but it's not recommended for environments with extreme heat. Prolonged outdoor exposure may also cause some colour fading over time.
Yes, GreenTEC is generally suitable for outdoor use, but it's not recommended for environments with extreme heat. Prolonged outdoor exposure may also cause some colour fading over time.
Compliance applies to the raw material, not the finished printed part. Any part intended for a regulated application must undergo separate certification by an accredited third-party laboratory. Requirements vary depending on intended use and applicable standards.
Store GreenTEC in a dry room at room temperature (18–27°C / 65–80°F). Stored neatly, it is protected from dust and sunlight.
When stored correctly, GreenTEC has a shelf life of 2 years.
UP TO 1000 MM/S
Recommended settings for printers with a 0.4 mm nozzle. Max. 50% layer height. Optimal settings may vary between printers and are also dependent on environmental factors.
Our material profiles make printing easier and more reliable. The profiles are perfectly optimised for Extrudr filaments and deliver perfect results straight away. Simply select your printer and material, import the profile into your slicer, and you’re ready to go.
| Mechanical Properties | Method | Value | Rating |
|---|---|---|---|
| Tensile modulus (Young's modulus) | ISO 527-1 | 3100 MPa | Excellent |
| Tensile strength at yield | ISO 527-1 | 47 MPa | Typical |
| Tensile stress at break | ISO 527-1 | 22 MPa | Typical |
| Elongation at break | ISO 527-1 | 30 % | Good |
| Flexural modulus | ISO 178 | 3200 MPa | Excellent |
| Flexural strength | ISO 178 | 65 MPa | Good |
| Charpy notched impact strength (+23°C) | ISO 179-1eA | 12 kJ/m² | Very Good |
| Charpy unnotched impact strength (+23°C) | ISO 179-1eU | 228 kJ/m² | Outstanding |
| Thermal Properties | Method | Value | Rating |
|---|---|---|---|
| Heat deflection temp. (HDT/B) — 0.45 MPa | ISO 75-1 | 55 °C | Typical |
| Vicat softening temp. (VST/B50) | ISO 306 | ~100 °C | Very Good |
| Melting point (Tm) | ISO 3146-C | 150–170 °C | - |
| Glass transition temp. (Tg) | ISO 11357-1 (DSC) | ~65 °C | Typical |
| Melt volume rate (MVR) — 235°C/5.0 kg | - | 2 cm³/10 min | Typical |
| Thermal decomposition temp. | - | ~230 °C | Typical |
| CLTE — flow direction | - | 0.65 cm/cm/°C | Very Good |
| Physical Properties | Method | Value | Rating |
|---|---|---|---|
| Density | ISO 1183-1 | 1.3 g/cm³ | - |
| Water absorption (saturation, 23°C) | - | 0.8 % | - |
| Mould shrinkage | ISO 294-4 | 0.8 % | Typical |
| Special Properties | Method | Value | Rating |
|---|---|---|---|
| UV resistance | - | Moderate | - |
| Chemical resistance | - | Moderate | - |
