Polyethylene terephthalate glycol (PETG) is one of the world's best-known thermoplastic polymers, valued for its balance of mechanical strength and optical quality. Extrudr PETG is built around low-shrinking technology, so large or detailed parts stay true to shape without warping, even without an enclosure for smaller prints. It offers high chemical resistance and good mechanical properties, making it a dependable choice for functional parts that need to hold up over time. No hardened nozzle is required, and the raw material is certified to FDA, REACH, and RoHS standards, with a flame-retardant rating of UL 94 V-2 as standard.
PETG
In Stock
Strength That Doesn't Warp
IDEAL FOR
Functional & Mechanical Parts
- Chemically Resistant Components
- Water-Exposed Applications
PETG Highlights
VERY GOOD CHEMICAL RESISTANCE
Holds up against a broad range of chemicals and solvents, suited to parts that need to withstand real-world exposure.
LOW-SHRINKING TECHNOLOGY
Engineered to minimize shrinkage, keeping large and detailed parts dimensionally accurate with minimal warping.
RELIABLE LAYER ADHESION
Strong bonding between layers creates dependable, water-resistant prints, ideal for parts exposed to moisture.
NO HARDENED NOZZLE REQUIRED
Prints reliably through a standard nozzle, no special hardware needed to get consistent results.
FITS ANY PRINTER, ANY SYSTEM
From standard FDM printers to AMS and multi-material setups, Extrudr filament is built to work reliably with the printer you already own.
MADE IN AUSTRIA
From the Austrian Alps, every Extrudr spool is manufactured with care, precision and strict EU standards.
Showcases

Fulcrum Plane
@HTL Salzburg

Labeling Clips

Portable Phone Lamp
Recommended settings for printers with a 0.4 mm nozzle. Max. 50% layer height. Optimal settings may vary between printers and are also dependent on environmental factors.
Our material profiles make printing easier and more reliable. The profiles are perfectly optimised for Extrudr filaments and deliver perfect results straight away. Simply select your printer and material, import the profile into your slicer, and you’re ready to go.
| Mechanical Properties | Method | Value | Rating |
|---|---|---|---|
| Tensile modulus (Young's modulus) | ISO 527-1 | 2980 MPa | Excellent |
| Tensile strength at yield | ISO 527-1 | 51 MPa | Good |
| Tensile stress at break | ISO 527-1 | 20 MPa | Typical |
| Elongation at break | ISO 527-1 | 29 % | Good |
| Flexural modulus | ISO 178 | 2040 MPa | Excellent |
| Flexural strength | ISO 178 | 68 MPa | Good |
| Charpy notched impact strength (+23°C) | ISO 179-1eA | 5 kJ/m² | Typical |
| Charpy notched impact strength (-30°C) | ISO 179-1eA | 4 kJ/m² | Typical |
| Charpy unnotched impact strength (+23°C) | ISO 179-1eU | No Break (NB) | - |
| Charpy unnotched impact strength (-30°C) | ISO 179-1eU | 120 kJ/m² | Outstanding |
| Thermal Properties | Method | Value | Rating |
|---|---|---|---|
| Heat deflection temp. (HDT/B) — 0.45 MPa | ISO 75-1 | 68 °C | Typical |
| Heat deflection temp. (HDT/A) — 1.8 MPa | ISO 75-1 | 62 °C | Typical |
| Vicat softening temp. (VST/B50) | ISO 306 | 75 °C | Typical |
| Melting point (Tm) | ISO 3146-C | Amorphous (no Tm) | - |
| Glass transition temp. (Tg) | ISO 11357-1 (DSC) | 80 °C | Good |
| Melt flow rate (MFR) — 210°C/2.16 kg | ISO 1133-1 (210°C/2.16 kg) | 6 g/10 min | Typical |
| Melt volume rate (MVR) — 235°C/5.0 kg | - | 40 cm³/10 min | Outstanding |
| Thermal decomposition temp. | - | 370 °C | Outstanding |
| CLTE — flow direction | - | 0.68 cm/cm/°C | Very Good |
| Physical Properties | Method | Value | Rating |
|---|---|---|---|
| Density | ISO 1183-1 | 1.29 g/cm³ | - |
| Water absorption (saturation, 23°C) | - | < 0.1 % | - |
| Mould shrinkage | ISO 294-4 | 0.5 % | Good |
| Special Properties | Method | Value | Rating |
|---|---|---|---|
| UV resistance | - | Good | - |
| Chemical resistance | - | Good | - |
PRINTING & COMPATIBILITY
PETG is compatible with all standard FDM printers on the market.
Yes. PETG is fully compatible with AMS (Automatic Material System) solutions, including the Bambu Lab AMS.
PETG is a hygroscopic material, meaning it naturally absorbs moisture from the air over time, which is why most PETG filaments require drying before use to achieve optimal print quality. Extrudr PETG has been tested to print reliably even without drying, making it more forgiving than typical PETG filaments. For best results we recommend drying the filament before printing, particularly after extended exposure to humid conditions or open air.
MATERIAL PROPERTIES
PETG generally performs better outdoors than PLA, offering improved resistance to UV, moisture, and heat. However, prolonged, permanent outdoor exposure can still cause gradual fading or embrittlement over time.
CERTIFICATION & COMPLIANCE
PETG is compliant with FDA, REACH, and RoHS standards. Any printed item intended for food contact needs to be separately certified.
Compliance applies to the raw material, not the finished printed part. Any part intended for a regulated application must undergo separate certification by an accredited third-party laboratory. Requirements vary depending on intended use and applicable standards.
CARE & STORAGE
Store PETG in a dry room at room temperature (18–27°C / 65–80°F). Stored neatly, it is protected from dust and sunlight.
When stored correctly, PETG has a shelf life of 2 years.
Latest reviews
Extrudr PETG verwenden wir in unserer Firma seit Jahren für technische Bauteile. Gleichbleibende Qualität und Produkteigenschaften sind für uns wichtig. Einzig der Versand könnte schneller sein... Produkt auf Lager und d…
Extrudr PETG verwenden wir in unserer Firma seit Jahren für technische Bauteile. Gleichbleibende Qualität und Produkteigenschaften sind für uns wichtig. Einzig der Versand könnte schneller sein... Produkt auf Lager und d…
Druckt schön mit dem fertigen Profil auf meinem P2S! Gerne wieder!
Druckt schön mit dem fertigen Profil auf meinem P2S! Gerne wieder!
Ich nehme ausschließlich PETG von Extrudr, da ich eine immer gleichbleibende Qualität habe.
Ich nehme ausschließlich PETG von Extrudr, da ich eine immer gleichbleibende Qualität habe.
















