Imprint

Privacy Policy

Shipping

Faqs

Product Catalogue

Data Sheets

Material Profiles

Contact

Story

Career At Extrudr

Interesting geometrical shape that brings out the shine of the Extrudr BioFusion filament very well. Due to the special shape of the Sphericon, the center of gravity always remains at the same height when rolling.

Print the Sphericon half two times. Glue the halves together with a adhesive for plastics.&nbsp;

Extrudr_Sphericon_half.3mf

_MG_6733-Edit (1).jpg

BioFusion arctic white 1,75 mm 0,8 kg

BioFusion cherry red 1,75 mm 0,8 kg

BioFusion jet black 1,75 mm 0,8 kg

Sphericon

The selfmade-solution “AMS Max” fits our 2,5 kg Extrudr spools perfectly and can hold 10 kg Filament all together. With the help of original components from the AMS Lite and a self-printed body, the AMS system enables multicolour prints with the Bambu Lab A1 and A1 Mini. This solution makes mulit-colour printing more flexible and enables the usage of the Extrudr big spools.

Building instructions for the AMS Max are designed by Jonas Blasy. The video with more details is on <a href="https://youtu.be/EM5bHcLKzoA?si=IDhuPs750AzZJWIC">YouTube</a>.

Layer thickness: 0.2mm<br>Walls: 5<br>Adhesive bond: Brim - 6mm<br>Support structure: Tree<br>Filling: Gyroid&nbsp;

Select the object and press the "N" button. Now you can color the font in the desired color.

Glue the base body and the hexagons together. Once for the line and for the right half. Then place the sensors for the RFID chip in the positions provided. The sensor cables must first be extended by 5 cm. 

Place the circuit board and the motors in the position provided. The original screws of the AMS can be used for screwing. Connect all plugs to the circuit board and screw together with the second half.

AMS MAX (Lite).stl

Jonas Blasy - AMS MAX 01.jpg

Jonas Blasy - AMS MAX 02 (1).jpg

Jonas Blasy - AMS MAX 03.jpg

PLA NX2 anthracite 1,75 mm 2,5 kg

PLA NX2 black 1,75 mm 2,5 kg

PLA NX2 white 1,75 mm 2,5 kg

AMS Max

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Have fun with printing and playing in the pool!&nbsp;

Watergun_Extrudr.zip

gewinnspiel-sommer-2023-1x1.jpg

gewinnspiel-sommer-2023-1x1-02.jpg

PETG red 1,75 mm 1,1 kg

FLEX Semisoft black 1,75 mm 0,75 kg

FLEX Medium hellfire red 1,75 mm 0,75 kg

PCTG anthracite 1,75 mm 0,8 kg

Water gun

Our modern Bird Feeder is a sleek addition to any garden and offers small birds a safe, cozy feeding space. It’s easily hung up with a simple cord, so you can place it wherever you like.

Designed with care, the entrance allows only small birds to access the food – protecting them from larger species like crows and letting them eat in peace. Just fill the sphere with birdseed, and the attached perch bar gives them a place to land and rest.

The print takes about 12 hours. We use our bio-based GreenTec Pro in natural color, which is understated and elegant, much more harmonious than bright hues. While not a typical outdoor filament, GreenTec Pro performs surprisingly well and blends beautifully with natural surroundings.

Sphericon

Material

BioFusion

Filament color

cherry red, arctic white, jet black

Supports

no

Licence

Other inspirations

AMS Max

Water gun

Bird Feeder

Search

Sphericon

Material

BioFusion

Filament color

cherry red, arctic white, jet black

Supports

no

Licence

Other inspirations

AMS Max

Water gun

Bird Feeder