This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Have fun with printing and playing in the pool!&nbsp;

Watergun.zip

gewinnspiel-sommer-2023-1x1.jpg

gewinnspiel-sommer-2023-1x1-02.jpg

Pistolet à eau

PETG red 1,75 mm 1,1 kg

FLEX Semisoft black 1,75 mm 0,75 kg

FLEX Medium hellfire red 1,75 mm 0,75 kg

PCTG anthracite 1,75 mm 0,8 kg

Water gun

<b>3D printed snowflakes: Elevate your winter decor</b>

Create your own winter wonderland with 3D printed snowflakes made from our PCTG filament. Each snowflake is a masterpiece of design and innovation and brings a touch of magic to your home. Be creative and try out different colours!

Snowflake.zip

1x1_foto-02.jpg

Flocons de neige  

PCTG transparent 1,75 mm 0,8 kg

PCTG white 1,75 mm 0,8 kg

Snowflakes  

Turn your empty&nbsp;Extrudr spools into storage space with these drawers.

In the file are stackable half height and stackable third height drawers. They are sorted into folders, the plain ones don't have the edges for labels. 

Print the drill template to drill in the correct places. Just turn it upside down and align the peg with the hole. Either mark the locations of the holes or simply drill through them. You need to drill the holes with a 5 mm or 1/5" drill.

Drill the holes in both top and bottom. Glue the bottom pin to the bottom of the spool, this helps making it more stable, especially with the stacked third heights.

The bottom pin gets glued in from the outside, avoid getting glue on the pin itself.

Thanks to our maker "Oachkatzl" who provided us with the files and the idea. Check out his makerworld account <a href="https://makerworld.com/en/@Oachkatzl">here</a>.&nbsp;

Extrudr_Storage_Drawer.zip

Extrudr_Spool_Storage.jpg

NZ8_4856-2.jpg

Extrudr_Spool_Storage_2024-Jan-19_04-54-52PM-000_CustomizedView13610596150.png

Extrudr_Spool_Storage_2024-Jan-19_05-22-28PM-000_CustomizedView35891345853.png

Tiroir en bobines 

PLA NX2 white 1,75 mm 1 kg

Spool Storage Drawers

The Extrudr teardrop watering can combines form and function. Its teardrop design adds a touch of elegance, while the narrow spout allows for precise watering of delicate or hard-to-reach plants.&nbsp;

Printed with DuraPro ASA the watering can is&nbsp;UV and weather resistant and therefore&nbsp;can be used in the garden and outdoor area. Printed with our PLA NX2 the watering can makes a good decorative object. 

Pistolet à eau

Matériel

PCTG/PETG, FLEX Medium and Semisoft

Colore del filamento

Différentes couleurs

Les soutiens

non

Licence

d'autres inspirations

Flocons de neige

Tiroir en bobines

Teardrop Watering Can

Chercher

Pistolet à eau

Matériel

PCTG/PETG, FLEX Medium and Semisoft

Colore del filamento

Différentes couleurs

Les soutiens

non

Licence

d'autres inspirations

Flocons de neige

Tiroir en bobines

Teardrop Watering Can