<b>3D printed snowflakes: Elevate your winter decor</b>

Create your own winter wonderland with 3D printed snowflakes made from our PCTG filament. Each snowflake is a masterpiece of design and innovation and brings a touch of magic to your home. Be creative and try out different colours!

Snowflake.zip

1x1_foto-02.jpg

PCTG transparent 1,75 mm 0,8 kg

PCTG white 1,75 mm 0,8 kg

Snowflakes  

<b>3D printed beer cooler: The ultimate summer chill companion</b>

What could be better than a cool beer on a hot summer day. We have something for you. The mould for the beer cooler was printed with FLEX medium hellfire red. Due to the stretchability of the material of up to 470%, the ice can be easily removed from the mould.

bierkuehler-02-1x1.jpg

bierkuehler-03-1x1.jpg

bierkuehler-01.jpg

Beercooler.zip

bierkuehler-04-1x1.jpg

FLEX Medium hellfire red 1,75 mm 0,75 kg

Beer Cooler 

Turn your empty&nbsp;Extrudr spools into storage space with these drawers.

In the file are stackable half height and stackable third height drawers. They are sorted into folders, the plain ones don't have the edges for labels. 

Print the drill template to drill in the correct places. Just turn it upside down and align the peg with the hole. Either mark the locations of the holes or simply drill through them. You need to drill the holes with a 5 mm or 1/5" drill.

Drill the holes in both top and bottom. Glue the bottom pin to the bottom of the spool, this helps making it more stable, especially with the stacked third heights.

The bottom pin gets glued in from the outside, avoid getting glue on the pin itself.

Thanks to our maker "Oachkatzl" who provided us with the files and the idea. Check out his makerworld account <a href="https://makerworld.com/en/@Oachkatzl">here</a>.&nbsp;

Extrudr_Storage_Drawer.zip

Extrudr_Spool_Storage.jpg

NZ8_4856-2.jpg

Extrudr_Spool_Storage_2024-Jan-19_04-54-52PM-000_CustomizedView13610596150.png

Extrudr_Spool_Storage_2024-Jan-19_05-22-28PM-000_CustomizedView35891345853.png

PLA NX2 white 1,75 mm 1 kg

Spool Storage Drawers

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Snowflakes

Material

PCTG

Filament color

transparent, white

Supports

no

Licence

Other inspirations

Beer Cooler

Spool Storage Drawers

Water gun

Search

Snowflakes

Material

PCTG

Filament color

transparent, white

Supports

no

Licence

Other inspirations

Beer Cooler

Spool Storage Drawers

Water gun