FLAX

FLAX is compatible with all standard FDM printers on the market.

Yes. FLAX is fully compatible with AMS (Automatic Material System) solutions, including the Bambu Lab AMS.

Yes. FLAX is a hygroscopic material and should be dried before printing to achieve optimal print quality. We recommend drying for 4 hours at 50°C.

Yes. Despite its mineral filler content being compatible with even a standard 0.4mm nozzle diameter, the abrasive nature of the material means a hardened nozzle (e.g., hardened steel or ruby) is recommended to prevent excess wear over time.

FLAX is compliant with FDA, REACH, and RoHS standards. Any printed item intended for food contact needs to be separately certified.

Compliance applies to the raw material, not the finished printed part. Any part intended for a regulated application must undergo separate certification by an accredited third-party laboratory. Requirements vary depending on intended use and applicable standards.

Store FLAX in a dry room at room temperature (18–27°C / 65–80°F). Stored neatly, it is protected from dust and sunlight.

When stored correctly, FLAX has a shelf life of 2 years.