<b>Modern 3D printed vases: Elevate your home decor with 5 different vases</b>

With PETG filament, you have the freedom to print these vases in a range of vibrant colors, allowing you to match your decor and set the mood in any room. Whether you prefer a sleek monochrome look or a burst of vibrant hues, these vases can be customized to suit your style.

vase_nr3.zip

Vasen_PETG-1x1_08.jpg

Vasen_PETG-1x1_11.jpg

Vasen_PETG-1x1_07.jpg

Vases

PETG anthracite 1,75 mm 1,1 kg

PETG hellfire red 1,75 mm 1,1 kg

PETG grey 1,75 mm 1,1 kg

Vase

<b>3D Printed Beer Cooler:&nbsp;The Ultimate Chiller</b>

What could be better than a cool beer on a hot summer day. We have something for you. The mould for the beer cooler was printed with FLEX medium hellfire red. Due to the stretchability of the material, the ice can be easily removed from the mould.

bierkuehler-02-1x1.jpg

bierkuehler-03-1x1.jpg

bierkuehler-01.jpg

Beercooler.zip

bierkuehler-04-1x1.jpg

Glacière à bière 

FLEX Medium hellfire red 1,75 mm 0,75 kg

Beer Cooler 

Turn your empty&nbsp;Extrudr spools into storage space with these drawers.

In the file are stackable half height and stackable third height drawers. They are sorted into folders, the plain ones don't have the edges for labels. 

Print the drill template to drill in the correct places. Just turn it upside down and align the peg with the hole. Either mark the locations of the holes or simply drill through them. You need to drill the holes with a 5 mm or 1/5" drill.

Drill the holes in both top and bottom. Glue the bottom pin to the bottom of the spool, this helps making it more stable, especially with the stacked third heights.

The bottom pin gets glued in from the outside, avoid getting glue on the pin itself.

Thanks to our maker "Oachkatzl" who provided us with the files and the idea. Check out his makerworld account <a href="https://makerworld.com/en/@Oachkatzl">here</a>.&nbsp;

Extrudr_Storage_Drawer.zip

Extrudr_Spool_Storage.jpg

NZ8_4856-2.jpg

Extrudr_Spool_Storage_2024-Jan-19_04-54-52PM-000_CustomizedView13610596150.png

Extrudr_Spool_Storage_2024-Jan-19_05-22-28PM-000_CustomizedView35891345853.png

Tiroir en bobines 

PLA NX2 white 1,75 mm 1 kg

Spool Storage Drawers

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Vases

Matériel

PETG

Colore del filamento

Différentes couleurs

Les soutiens

non

Licence

d'autres inspirations

Glacière à bière

Tiroir en bobines

Pistolet à eau

Chercher

Vases

Matériel

PETG

Colore del filamento

Différentes couleurs

Les soutiens

non

Licence

d'autres inspirations

Glacière à bière

Tiroir en bobines

Pistolet à eau