Imprint

Privacy Policy

Shipping

Faqs

Product Catalogue

Data Sheets

Material Profiles

Contact

Story

Career At Extrudr

<b>Modern 3D printed vases: Elevate your home decor with 5 different vases</b>

With PETG filament, you have the freedom to print these vases in a range of vibrant colors, allowing you to match your decor and set the mood in any room. Whether you prefer a sleek monochrome look or a burst of vibrant hues, these vases can be customized to suit your style.

vase_nr3.zip

Vasen_PETG-1x1_08.jpg

Vasen_PETG-1x1_11.jpg

Vasen_PETG-1x1_07.jpg

Vaso

PETG anthracite 1,75 mm 1,1 kg

PETG hellfire red 1,75 mm 1,1 kg

PETG grey 1,75 mm 1,1 kg

Vase

<b>3D-Printed Fishing Box – Durable &amp; Customizable!&nbsp;</b>

Print your own fishing box for your next angling adventure! This practical design can be printed on a single print bed, if desired. We offer multiple compartment layout options to help you organize your gear efficiently.

For maximum durability &amp; UV resistance, we recommend our DuraPro ASA – perfect for outdoor use near the water! And if you need more space, you can easily scale up the model to fit your needs.

Extrudr_Fishing Box All Sizes.zip

_MG_5662.jpg

_MG_5538.jpg

_MG_5651.jpg

_MG_5539.jpg

_MG_5503.jpg

Scatola da Pesca

DuraPro ASA anthracite 1,75 mm 0,75 kg

PLA NX2 hellfire red 1,75 mm 1 kg

Fishing Box

Turn your empty&nbsp;Extrudr spools into storage space with these drawers.

In the file are stackable half height and stackable third height drawers. They are sorted into folders, the plain ones don't have the edges for labels. 

Print the drill template to drill in the correct places. Just turn it upside down and align the peg with the hole. Either mark the locations of the holes or simply drill through them. You need to drill the holes with a 5 mm or 1/5" drill.

Drill the holes in both top and bottom. Glue the bottom pin to the bottom of the spool, this helps making it more stable, especially with the stacked third heights.

The bottom pin gets glued in from the outside, avoid getting glue on the pin itself.

Thanks to our maker "Oachkatzl" who provided us with the files and the idea. Check out his makerworld account <a href="https://makerworld.com/en/@Oachkatzl">here</a>.&nbsp;

Extrudr_Storage_Drawer.zip

Extrudr_Spool_Storage.jpg

NZ8_4856-2.jpg

Extrudr_Spool_Storage_2024-Jan-19_04-54-52PM-000_CustomizedView13610596150.png

Extrudr_Spool_Storage_2024-Jan-19_05-22-28PM-000_CustomizedView35891345853.png

Cassetto in bobine 

PLA NX2 white 1,75 mm 1 kg

Spool Storage Drawers

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Vaso

Materiale

PETG

Colore del filamento

Colori diversi

Supporta

no

Licenza

Altre ispirazioni

Scatola da Pesca

Cassetto in bobine

Pistola ad acqua

Ricerca

Vaso

Materiale

PETG

Colore del filamento

Colori diversi

Supporta

no

Licenza

Altre ispirazioni

Scatola da Pesca

Cassetto in bobine

Pistola ad acqua