Interesting geometrical shape that brings out the shine of the Extrudr BioFusion filament very well. Due to the special shape of the Sphericon, the center of gravity always remains at the same height when rolling.

Print the Sphericon half two times. Glue the halves together with a adhesive for plastics.&nbsp;

Extrudr_Sphericon_half.3mf

_MG_6733-Edit (1).jpg

BioFusion arctic white 1,75 mm 0,8 kg

BioFusion cherry red 1,75 mm 0,8 kg

BioFusion jet black 1,75 mm 0,8 kg

Sphericon

For the last couple of years, we released each Easter a new 3D printed bunny to add joy and wonder to your celebrations. This evolving tradition brings the magic of 3D printing to your holiday festivities.

These adorable bunnies are designed to make your Easter even more special. You can print these delightful figurines in various colors and materials, adding a personal touch to your Easter decor. Gift your 3D printed Easter bunnies to family and friends!&nbsp;

v-01_1080x1920-all.jpg

Easterbunny.zip

v-01_1500x1200-all.jpg

BioFusion inca gold 1,75 mm 0,8 kg

PLA NX2 emerald green 1,75 mm 0,8 kg

PLA NX2 hellfire red 1,75 mm 1 kg

XPETG MATT blue 1,75 mm 1 kg

Easter bunnies

<b>3D Printed Beer Cooler:&nbsp;The Ultimate Chiller</b>

What could be better than a cool beer on a hot summer day. We have something for you. The mould for the beer cooler was printed with FLEX medium hellfire red. Due to the stretchability of the material, the ice can be easily removed from the mould.

bierkuehler-02-1x1.jpg

bierkuehler-03-1x1.jpg

bierkuehler-01.jpg

Beercooler.zip

bierkuehler-04-1x1.jpg

FLEX Medium hellfire red 1,75 mm 0,75 kg

Beer Cooler 

This water gun consists of 3 parts (handle, body/cylinder and sealing).

 The handle and the cylinder must be printed with a rigid material (PCTG/PETG) and need to be printed in place because these two are interlocking.&nbsp;

The sealing should be printed beforehand out of a flexible material (FLEX Medium, FLEX Semisoft). We got the best result by scaling up the seal 1%. If the seal is too big the resistance to insert the sealing is too high and if the seal is too small the water gun isn't working properly.&nbsp;

After the sealing is printed, the rest must be printed, but you have to add a pause at a z-heigth of 152.4mm or layer number 762 if you print all layers with 0.2mm layer height.

When the print is paused insert the lubricated seal carefully and resume the print. After the print is finished try to unlock the pistol.&nbsp;

If the seal isn't tight enough submerge the gun totally under water for reloading. 

Sphericon

Material

BioFusion

Filament color

cherry red, arctic white, jet black

Supports

no

Licence

Other inspirations

Easter bunnies

Beer Cooler

Water gun

Search

Sphericon

Material

BioFusion

Filament color

cherry red, arctic white, jet black

Supports

no

Licence

Other inspirations

Easter bunnies

Beer Cooler

Water gun