Imprint

Privacy Policy

Shipping

Faqs

Product Catalogue

Data Sheets

Material Profiles

Contact

Story

Career At Extrudr

Interesting geometrical shape that brings out the shine of the Extrudr BioFusion filament very well. Due to the special shape of the Sphericon, the center of gravity always remains at the same height when rolling.

Print the Sphericon half two times. Glue the halves together with a adhesive for plastics.&nbsp;

Extrudr_Sphericon_half.3mf

_MG_6733-Edit (1).jpg

Sphericon

BioFusion arctic white 1,75 mm 0,8 kg

BioFusion cherry red 1,75 mm 0,8 kg

BioFusion jet black 1,75 mm 0,8 kg

Modern 3D printed vases: Elevate your home decor with 5 different vases

With PETG filament, you have the freedom to print these vases in a range of vibrant colors, allowing you to match your decor and set the mood in any room. Whether you prefer a sleek monochrome look or a burst of vibrant hues, these vases can be customized to suit your style.

vase_nr3.zip

Vasen_PETG-1x1_08.jpg

Vasen_PETG-1x1_11.jpg

Vasen_PETG-1x1_07.jpg

Vases

PETG anthracite 1,75 mm 1,1 kg

PETG hellfire red 1,75 mm 1,1 kg

PETG grey 1,75 mm 1,1 kg

Vase

The selfmade-solution “AMS Max” fits our 2,5 kg Extrudr spools perfectly and can hold 10 kg Filament all together. With the help of original components from the AMS Lite and a self-printed body, the AMS system enables multicolour prints with the Bambu Lab A1 and A1 Mini. This solution makes mulit-colour printing more flexible and enables the usage of the Extrudr big spools.

Building instructions for the AMS Max are designed by Jonas Blasy. The video with more details is on <a href="https://youtu.be/EM5bHcLKzoA?si=IDhuPs750AzZJWIC">YouTube</a>.

Layer thickness: 0.2mm Walls: 5 Adhesive bond: Brim - 6mm Support structure: Tree Filling: Gyroid&nbsp;

Select the object and press the "N" button. Now you can color the font in the desired color.

Glue the base body and the hexagons together. Once for the line and for the right half. Then place the sensors for the RFID chip in the positions provided. The sensor cables must first be extended by 5 cm. 

Place the circuit board and the motors in the position provided. The original screws of the AMS can be used for screwing. Connect all plugs to the circuit board and screw together with the second half.

AMS MAX (Lite).stl

Jonas Blasy - AMS MAX 01.jpg

Jonas Blasy - AMS MAX 02 (1).jpg

Jonas Blasy - AMS MAX 03.jpg

AMS Max

PLA NX2 anthracite 1,75 mm 2,5 kg

PLA NX2 black 1,75 mm 2,5 kg

PLA NX2 white 1,75 mm 2,5 kg

Our Extrudr Frisbee is the perfect summer print: easy to make and lots of fun. Whether you’re in the garden, at the park, or by the lake. It only needs around 40 g of filament, making it perfect to use up leftover spools.

Just a quick note: this Frisbee doesn’t just fly well it also can fly fast! So it might sting a little if it hits someone at full speed. Best to keep a bit of distance and avoid aiming at heads.&nbsp;

Also good to know: Don’t leave your PLA Frisbee out in the sun for too long, as it may deform in the heat. For hot days, DuraPro ASA or our FLEX Medium (TPU) are better suited.

Sphericon

Matériel

BioFusion

Couleur du filament

cherry red, arctic white, jet black

Les soutiens

non

Licence

d'autres inspirations

Vases

AMS Max

Frisbee

Chercher

Sphericon

Matériel

BioFusion

Couleur du filament

cherry red, arctic white, jet black

Les soutiens

non

Licence

d'autres inspirations

Vases

AMS Max

Frisbee