• For more detailed information on material properties, check the product specific page.

• Extrudr filaments are compatible with all standard FDM printers.

• Carbon and glass fiber filaments require a nozzle diameter of at least 0.6 mm to ensure optimal performance and prevent clogging.

MATERIAL	DRYING TIME (h)	DRYING TEMPERATURE (°C)	ENCLOSED SPACE	HARDENED NOZZLE	NOZZLE 0,4 MM	NOZZLE 0,6 MM	NOZZLE 0,8 MM
PLA Basic	not required	50	no	no	✔	✔	✔
PLA Basic CMYK	not required	50	no	no	✔	✔	✔
PLA Basic CF	not required	50	no	✔	not recommended	✔	✔
PLA HS	not required	50	no	no	✔	✔	✔
PLA NX2 MATT	not required	50	no	no	✔	✔	✔
PLA Tough	not required	50	no	no	✔	✔	✔
PETG	0-6	60	no	no	✔	✔	✔
XPETG CF	4-6	60	no	✔	not recommended	✔	✔
XPETG MATT	4-6	60	no	no	✔	✔	✔
XPETG REC	4-6	60	no	no	✔	✔	✔
PCTG	4-6	60	no	no	✔	✔	✔
GreenTEC	0-4	60	no	no	✔	✔	✔
GreenTEC Pro	0-4	60	no	no	✔	✔	✔
GreenTEC Pro CF	0-4	60	no	✔	not recommended	✔	✔
DuraPro ABS	10	60	✔	no	✔	✔	✔
DuraPro ABS CF	10	60	✔	✔	not recommended	✔	✔
DuraPro ASA	10	60	✔	no	✔	✔	✔
DuraPro ASA CF	10	60	✔	✔	not recommended	✔	✔
DuraPro ASA GF	8-12	65	✔	✔	not recommended	✔	✔
DuraProPA6 CF	8-12	65	✔	✔	not recommended	✔	✔
DuraProPA6 GF	8-12	65	✔	✔	not recommended	✔	✔
DuraPro PA12	8-12	65	✔	no	✔	✔	✔
DuraPro PA12 CF	8-12	65	✔	✔	not recommended	✔	✔
DuraPro PC FR V0	8-12	65	✔	no	✔	✔	✔
DuraPro PC/PBT	8-12	65	✔	no	✔	✔	✔
DuraPro PC/PBT CF	8-12	65	✔	✔	not recommended	✔	✔
FLEX Hard	12	60	no	no	✔	✔	✔
FLEX Hard CF	12	60	no	✔	not recommended	✔	✔
FLEX Hard Pro	4-8	60	no	no	✔	✔	✔
FLEX Medium	12	60	no	no	✔	✔	✔
FLEX Medium MATT	12	60	no	no	✔	✔	✔
FLEX Medium ESD	6	60	no	no	not recommended	✔	✔
FLEX Semisoft	12	60	no	no	✔	✔	✔
PEARL	4	50	no	no	✔	✔	✔
WOOD	4	50	no	no	not compatible	✔	✔
BioFusion	0-4	60	no	no	✔	not recommended	not recommended
FLAX	4	50	no	✔	✔	✔	✔