Only 25 left in stock
WOOD comes from Extrudr's BIO design range and is made from renewable raw materials such as lignin and other biopolymers. Reinforced with real spruce fiber, it creates a unique, natural wood-like appearance, texture, and even scent, not just a printed effect, but a filament with genuine wood content. Despite the added fiber, it offers good printing and flow properties with low warping, and the raw material is approved to REACH, RoHS, and FDA standards.
From standard FDM printers to AMS and multi-material setups, Extrudr filament is built to work reliably with the printer you already own.
Real spruce fiber content gives every print a genuine wood-like scent, texture, and appearance, not just a visual effect.
From the Austrian Alps, every Extrudr spool is manufactured with care, precision and strict EU standards.
Made with real wood fiber, not foaming agents, for an authentic wood feel and look, layer after layer.
Prints smoothly with low warping, despite its natural fiber content.
Made from renewable raw material and compliant with EN 13432, a genuinely sustainable choice.
Recommended settings for printers with a 0.4 mm nozzle. Max. 50% layer height. Optimal settings may vary between printers and are also dependent on environmental factors.
Our material profiles make printing easier and more reliable. The profiles are perfectly optimised for Extrudr filaments and deliver perfect results straight away. Simply select your printer and material, import the profile into your slicer, and you’re ready to go.
Groot Flower Pot
Treasure Chest
Honeycomb Coaster
| Mechanical Properties | Method | Value | Rating |
|---|---|---|---|
| Tensile modulus (Young's modulus) | ISO 527-1 | 3200 MPa | Excellent |
| Tensile strength at yield | ISO 527-1 | 35 MPa | Typical |
| Tensile stress at break | ISO 527-1 | 35 MPa | Very Good |
| Elongation at break | ISO 527-1 | 2 % | Typical |
| Flexural modulus | ISO 178 | 3400 MPa | Excellent |
| Flexural strength | ISO 178 | 43 MPa | Typical |
| Charpy notched impact strength (+23°C) | ISO 179-1eA | 2.5 kJ/m² | Typical |
| Charpy notched impact strength (-30°C) | ISO 179-1eA | 2 kJ/m² | Typical |
| Charpy unnotched impact strength (+23°C) | ISO 179-1eU | 16 kJ/m² | Typical |
| Charpy unnotched impact strength (-30°C) | ISO 179-1eU | 13 kJ/m² | Typical |
| Thermal Properties | Method | Value | Rating |
|---|---|---|---|
| Heat deflection temp. (HDT/B) — 0.45 MPa | ISO 75-1 | 49 °C | Typical |
| Heat deflection temp. (HDT/A) — 1.8 MPa | ISO 75-1 | 46 °C | Typical |
| Vicat softening temp. (VST/B50) | ISO 306 | 48 °C | Typical |
| Melting point (Tm) | ISO 3146-C | 150–170 °C | - |
| Glass transition temp. (Tg) | ISO 11357-1 (DSC) | 60 °C | Typical |
| Melt flow rate (MFR) — 210°C/2.16 kg | ISO 1133-1 (210°C/2.16 kg) | 22 g/10 min | Typical |
| Melt volume rate (MVR) — 235°C/5.0 kg | - | 25 cm³/10 min | Excellent |
| Thermal decomposition temp. | - | 240 °C | Typical |
| CLTE — flow direction | - | 0.65 cm/cm/°C | Very Good |
| Physical Properties | Method | Value | Rating |
|---|---|---|---|
| Density | ISO 1183-1 | 1.23 g/cm³ | - |
| Water absorption (saturation, 23°C) | - | 1 % | Outstanding |
| Mould shrinkage | ISO 294-4 | 0.3 % | Excellent |
| Special Properties | Method | Value | Rating |
|---|---|---|---|
| UV resistance | - | Limited | - |
| Chemical resistance | - | Limited | - |
